Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue

Catalogue

Target D1=15 mm retro coded No. 151-500 (M)
Target D1=15 mm retro coded No. 151-500 (M)
ID: ART111277
Price:  €2,780.00
Quick Overview:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Part Number:  ART111277
  • Coding:  14 Bit
  • Number Range:  151 - 500
  • Reflection Type:  Retro-reflective
  • Diameter (D1):  15
Delivery time 10-15 days
Extension Set Connection Crosses Retro (5 pc.)
Extension Set Connection Crosses Retro (5 pc.)
ID: ART106097
Price:  €890.00
Quick Overview: 

Extension set connection crosses Retro.
  • Part Number:  ART106097
  • Coding:  14 Bit
  • Number Range:  451 - 475
  • Reflection Type:  Retro-reflective
  • Diameter (D1):  10
Delivery time 10-15 days
Set of Connection Crosses White (5 pc.)
Set of Connection Crosses White (5 pc.)
ID: ART106094
Price:  €830.00
Quick Overview: 

Set of connection crosses for DPA White systems.
  • Part Number:  ART106094
  • Coding:  14 Bit
  • Number Range:  476 - 500
  • Reflection Type:  White Dot
  • Diameter (D1):  10
Delivery time 10-15 days
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
ID: RE54T153-00039
Price:  €475.00
Quick Overview: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Price:  €500.00
Quick Overview:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 18
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
In Stock - Despatched 1-2 Days
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Price:  €489.00
Quick Overview:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 14
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
In Stock - Despatched 1-2 Days
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Price:  €489.00
Quick Overview:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 12
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Delivery time 10-15 days
M5-Stylus (DS-3-TC-2-L35)
M5-Stylus (DS-3-TC-2-L35)
ID: M00-694-192-000
Price:  €1,120.00
Quick Overview:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 35 mm. For use on coordinate measuring machines (CMM).
  • Part Number:  M00-694-192-000
  • Thread:  M5
  • Tip Material:  Diamond
  • Tip Diameter (D):  3
  • Length (L):  35
Delivery > 25 days
M5-Stylus (DS-3-TC-2-L30)
M5-Stylus (DS-3-TC-2-L30)
ID: M00-694-194-000
Price:  €1,120.00
Quick Overview:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on coordinate measuring machines (CMM).
  • Part Number:  M00-694-194-000
  • Thread:  M5
  • Tip Material:  Diamond
  • Tip Diameter (D):  3
  • Length (L):  30
Delivery > 25 days
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
ID: M00-694-190-000
Price:  €1,120.00
Quick Overview:  Straight stylus with Ø2 mm, diamond sphere Ø1 mm, tapered tungsten carbide stem Ø0.8/2 mm, length 22 mm. For use on coordinate measuring machines (CMM).
  • Part Number:  M00-694-190-000
  • Thread:  D2
  • Tip Material:  Diamond
  • Tip Diameter (D):  1
  • Length (L):  22
Delivery > 25 days
DPA Connection Igloos White Set (10 pc.)
DPA Connection Igloos White Set (10 pc.)
ID: ART111631
Price:  €2,870.00
Quick Overview: 

Set of 10 connection igloos for DPA White systems.
  • Part Number:  ART111631
  • Coding:  14 Bit
  • Number Range:  301 - 430
  • Reflection Type:  White Dot
  • Adhesion:  Magnetic (M)
Delivery time 10-15 days
Set of Connection Crosses Retro (5 pc.)
Set of Connection Crosses Retro (5 pc.)
ID: ART106096
Price:  €890.00
Quick Overview: 

Set of connection crosses Retro.
  • Part Number:  ART106096
  • Coding:  14 Bit
  • Number Range:  476 - 500
  • Reflection Type:  Retro-reflective
  • Diameter (D1):  10
Delivery time 10-15 days
Tube Holder (Ø 0-20 mm)
Tube Holder (Ø 0-20 mm)
ID: EBD-12865
Price:  €1,750.00
Quick Overview:  Fixture for securely holding tubes during measurement. Compatible with tubes up to Ø20 mm.
  • Max. Tube Diameter:  0 - 20
  • Part Number:  EBD-12865
Delivery > 25 days
Tube Holder (Ø 20-70 mm)
Tube Holder (Ø 20-70 mm)
ID: EBD-12866
Price:  €1,850.00
Quick Overview:  Fixture for securely holding tubes during measurement. Compatible with tubes from Ø20 mm to Ø70 mm.
  • Max. Tube Diameter:  20 - 70
  • Part Number:  EBD-12866
Delivery > 25 days
PC-DMIS CAD++ OFFLINE
PC-DMIS CAD++ OFFLINE
ID: ROY-CAD**-O
Price:  €11,498.00
Quick Overview:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Single User Licence.
  • Part Number:  ROY-CAD++-O
  • Part Number:  ROY-CAD++-O
  • Licence Type:  Single User Licence
  • Requirements:  see software requirement tab
  • Price:  Per Licence
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
ID: ROY-CAD**-O-FLOAT
Price:  €13,808.00
Quick Overview:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Multi-user Licence.
  • Part Number:  ROY-CAD++-O-FLOAT
  • Part Number:  ROY-CAD++-O-FLOAT
  • Licence Type:  Floating Licence
  • Requirements:  see software requirement tab
  • Price:  Per Licence
DPA Connection Igloos Retro Set (10 pc.)
DPA Connection Igloos Retro Set (10 pc.)
ID: ART111632
Price:  €2,870.00
Quick Overview: 

Set of 10 connection igloos for DPA Retro systems.
  • Part Number:  ART111632
  • Coding:  14 Bit
  • Number Range:  301 - 430
  • Reflection Type:  Retro-reflective
  • Diameter (D1):  10
Delivery time 10-15 days
Extension Set Connection Crosses White (5 pc.)
Extension Set Connection Crosses White (5 pc.)
ID: ART106095
Price:  €830.00
Quick Overview: 

Extension set connection crosses White.
  • Part Number:  ART106095
  • Coding:  14 Bit
  • Number Range:  451 - 475
  • Reflection Type:  White Dot
  • Diameter (D1):  10
Delivery time 10-15 days
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
ID: RE54T153-00032
Price:  €520.00
Quick Overview: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.  
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
ID: RE54T153-00057
Price:  €1,680.00
Quick Overview: 

Target Group: Engineers & Designers
Course Goals. To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.
Prerequisites: Basic knowledge in reading technical drawings.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com