Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheitsmaßnahmen bitten wir Sie, Ihr Passwort zurückzusetzen
  1. Startseite
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Preis:  480,00 €
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Lieferzeit 10-15 Tage
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Preis:  560,00 €
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Lieferzeit 10-15 Tage
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Preis:  1 004,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Preis:  €33.00
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Référence:  FX-CTSML
  • Filetage:  Sans filetage
Auf Lager - Versand 1-2 Tage
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Preis:  €47.00
Schnellübersicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
Auf Lager - Versand 1-2 Tage
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Preis:  €27.00
Schnellübersicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Référence:  FX-TOOLS
Auf Lager - Versand 1-2 Tage
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Preis:  €95.00
Schnellübersicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Référence:  FX-UNI/JOINT
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Vee Locator
Vee Locator
ID: FX-VEE
Preis:  €77.00
Schnellübersicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Référence:  FX-VEE
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Preis:  139,00 €
Schnellübersicht:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Référence:  FX-TOG
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Preis:  22,00 €
Schnellübersicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FX-SO/SUPP
  • Longueur:  10 mm
  • Diamètre:  15 mm
Auf Lager - Versand 1-2 Tage
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Preis:  62,00 €
Schnellübersicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Référence:  FX-HEIGHT
  • Longueur:  50 mm
  • Diamètre:  16 mm
Auf Lager - Versand 1-2 Tage
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Preis:  1.955,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/600
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Preis:  6,00 €
Schnellübersicht:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Référence:  FX-BPRTR
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Preis:  1.254,00 €
Schnellübersicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-STARTERKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
Auf Lager - Versand 1-2 Tage
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Preis:  22,00 €
Schnellübersicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Référence:  FX-SO/MAG
  • Longueur:  20 mm
  • Diamètre:  16 mm
Auf Lager - Versand 1-2 Tage
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Preis:  22,00 €
Schnellübersicht:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FX-CONE
  • Filetage:  M8
Auf Lager - Versand 1-2 Tage
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Preis:  49,00 €
Schnellübersicht:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Référence:  FX-PR30PLATE
  • Taille:  130 x 30 mm
Auf Lager - Versand 1-2 Tage
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Preis:  40,00 €
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/100
  • Taille:  30 x 30 x 100 mm
Auf Lager - Versand 1-2 Tage
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Preis:  49,00 €
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Référence:  FX-PR30/250
  • Taille:  30 x 30 x 250 mm
Auf Lager - Versand 1-2 Tage
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Preis:  38,00 €
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/50
  • Taille:  30 x 30 x 50 mm
Auf Lager - Versand 1-2 Tage