Macchina Utensile

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø4 mm, length 6 mm. For use on machine tools. Previous part number: 91.00-T9/6-ST-M3

Taper Shank JIS BT40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Adapter from CC11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with CC11 connection.

Taper Shank SK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Straight stylus with M4 thread, ruby ball Ø2 mm, tungsten carbide stem Ø1.5 mm, length 50 mm. For use on machine tools.

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 10 m / 32.8'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 5 m / 16.4'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'

Extension cable for Hexagon sensor cables with M12/F12 plugs. Length: 10 m / 32.8'

Extension cable for Hexagon sensor cables with M12/F12 plugs. Length: 50 m / 164'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 30 m / 98.4'

Extension cable for Hexagon sensor cables with M12/F12 plug. Length: 30 m / 98.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'

Adapter cable with M12/F12 and M12/M08 plugs. Length: 0.2 m / 0.66'

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT30 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).