text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Probe with fixed ball (SS-20-C-180)
Probe with fixed ball (SS-20-C-180)
ID: H00000383-17
Prijs:  € 536,00
Beknopt overzicht:  180 mm carbon probe with glue-mounted stainless steel ball Ø20 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000383-17
  • Kogel diameter:  20
  • Lengte:  180
Levertijd > 25 dagen
Probe with M5-Stylus (R-10-C-100)
Probe with M5-Stylus (R-10-C-100)
ID: H00000576-04
Prijs:  € 536,00
Beknopt overzicht:  100 mm carbon probe with mounted ruby ball M5-Stylus Ø10 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000576-04
  • Kogel diameter:  10
  • Lengte:  100
Levertijd > 25 dagen
Probe with fixed ball (SS-15-C-75)
Probe with fixed ball (SS-15-C-75)
ID: H00000383-05
Prijs:  € 536,00
Beknopt overzicht:  75 mm carbon probe with glue-mounted stainless steel ball Ø15 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000383-05
  • Kogel diameter:  15
  • Lengte:  75
Levertijd > 25 dagen
Probe with fixed ball (SS-12.7-C-85)
Probe with fixed ball (SS-12.7-C-85)
ID: H00000383-07
Prijs:  € 536,00
Beknopt overzicht:  85 mm carbon probe with glue-mounted stainless steel ball Ø12.7 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000383-07
  • Kogel diameter:  12.7
  • Lengte:  85
Levertijd > 25 dagen
Probe with fixed ball (SS-9.5-C-50)
Probe with fixed ball (SS-9.5-C-50)
ID: H00000383-01
Prijs:  € 536,00
Beknopt overzicht:  50 mm carbon probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000383-01
  • Kogel diameter:  9.5
  • Lengte:  50
Levertijd > 25 dagen
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prijs:  € 5.756,00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prijs:  € 8.550,00
Beknopt overzicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd > 25 dagen
Jogbox (NJB) Kit with cable, 6 m
Jogbox (NJB) Kit with cable, 6 m
ID: G59682700
Prijs:  € 1.494,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (6 m).
  • Onderdeelnummer:  G59682700
Op voorraad - verzending 1-2 dagen
Jogbox (NJB) Kit with cable, 15 m
Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Prijs:  € 1.698,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (15 m).
  • Onderdeelnummer:  G59682800
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 200 mm)
ID: G39031501
Prijs:  € 1.276,00
Beknopt overzicht: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
  • Onderdeelnummer:  G39031501
  • Sphere Material:  Keramiek
  • Kogel Diameter:  25
  • Mannelijke schroefdraad:  M8
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
ID: G39032100
Prijs:  € 796,00
Beknopt overzicht: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and an extension (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.
  • Onderdeelnummer:  G39032100
  • Sphere Material:  Keramiek
  • Kogel Diameter:  25
  • Mannelijke schroefdraad:  M8
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  € 1.004,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  € 33,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTSML
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  € 47,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  € 279,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  € 84,00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Onderdeelnummer:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  € 33,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTMED
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  € 819,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  € 33,00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Onderdeelnummer:  FX-M8SPRGNUT
Op voorraad - verzending 1-2 dagen